قرار إداري رقم (163) لسنة 2018
بشأن تعليمات تصنيف مكاتب الاستشارات الهندسية في إمارة أبوظبي
رئيس دائرة التخطيط العمراني والبلديات
بعد الاطلاع على القانون رقم (1) لسنة 1974 بإعادة تنظيم الجهاز الحكومي في إمارة أبوظبي وتعديلاته،
وعلى القانون رقم (4) لسنة 1983 في شأن تنظيم أعمال البناء وتعديلاته ولائحته التنفيذية وتعديلاتها،
وعلى القانون رقم (5) لسنة 2018 بشأن إنشاء دائرة التخطيط العمراني والبلديات،
وعلى المرسوم الأميري رقم (13) لسنة 2017 في شأن إعادة تشكيل المجلس التنفيذي لإمارة أبوظبي،
وعلى قرار رئيس المجلس التنفيذي رقم (20) لسنة 2018 بشأن اختصاصات إضافية لدائرة التخطيط العمراني والبلديات،
وعلى قرار رئيس دائرة التنمية الاقتصادية رقم (1) لسنة 2009 بشأن نظام تصنيف مكاتب الاستشارات الهندسية في إمارة أبوظبي،
وعلى القرار الإداري رقم (56) لسنة 2010 الصادر عن دائرة التنمية الاقتصادية، بشأن تعليمات تصنيف المقاولين،
وعلى القرار الإداري رقم (69) لسنة 2010 بشأن تعديل جدول مخالفات المنشآت الاقتصادية في إمارة أبوظبي المرفق بالقانون رقم (2) لسنة 2009 بإنشاء دائرة التنمية الاقتصادية،
وعلى القرار الإداري رقم (6) لسنة 2018 بشأن نظام تسجيل مكتب طرف ثالث للتدقيق والتفتيش على المشاريع الهندسية بإمارة أبوظبي،
وعلى القرار الإداري رقم (158) لسنة 2018 بشأن نظام قيد المهندسين في إمارة أبوظبي،
وعلى القرار الإداري رقم (159) لسنة 2018 بشأن تعليمات قيد المهندسين في إمارة أبوظبي،
وعلى القرار الإداري رقم (162) بشأن نظام تصنيف مكاتب الاستشارات الهندسية في إمارة ابوظبي ،
قرر الآتي:
المادة (1)
نطاق التطبيق
تسري أحكام هذه التعليمات على جميع المكاتب الهندسية التي تمارس أعمال الاستشارات الهندسية في الإمارة حسب التخصصات المعتمدة الواردة في أحكام هذا القرار.
المادة (2)
السجل
1. ينشأ في الدائرة سجل يسمى (سجل تصنيف مكاتب الاستشارات الهندسية) يسجل فيه جميع بيانات المكاتب الهندسية المصنفين ويحتوي على معلومات وبيانات ما يلي:
أ. المكتب الهندسي.
ب. المجال والتخصص وفئة التصنيف.
ت. المؤهلات العلمية والخبرات العملية لصاحب الترخيص لكل تخصص.
ث. المؤهلات العلمية والخبرات العملية للكادر الفني.
ج. المشاريع التي تم التصنيف بناءً عليها.
ح. الوضع المالي الذي تم التصنيف بناءً عليه.
خ. شهادات الجودة الحاصل عليها المكتب الهندسي.
د. وثائق تأمين المسؤولية المهنية الخاصة بالمكتب الهندسي.
ذ. المؤهلات العلمية والخبرات العملية لمدير المكتب.
ر. المشاريع الجاري تصميمها أو الإشراف على تنفيذها.
ز. تقييم كفاءة الأعمال المنجزة.
س. متطلبات التميز الهندسي.
2. لكل ذي مصلحة الاطلاع على السجلات وطلب شهادة بالبيانات المدونة بالسجل على أن يكون طلبه مكتوباً ومستوفياً للرسوم المقررة لذلك.
المادة (3)
فئات تصنيف مكاتب الاستشارات الهندسية
1. يصنف المكتب الهندسي المحلي في الفئة الخاصة أو الأولى أو الثانية.
2. يصنف فرع المكتب الهندسي الأجنبي والمكتب الهندسي المشارك ومكتب مهندس الرأي في الفئة الخاصة فقط.
3. لا يجوز للمكتب الهندسي تنفيذ أعمال الاستشارات الهندسية إلا في الفئة المصنف فيها والفئات الأدنى منها، وذلك بحسب أحكام نظام وتعليمات التصنيف.
المادة (4)
مرفقات طلب التصنيف
على المكتب الهندسي أن يرفق بطلب التصنيف الجديد، أو عند طلب التجديد أو الترفيع أو التعديل، البيانات والوثائق التالية:
1. صورة من الرخصة التجارية سارية المفعول تتضمن التخصصات المطلوب التصنيف فيها.
2. كشف صادر عن دائرة التنمية الاقتصادية موضحاً فيه الرخص التجارية المملوكة لصاحب الترخيص للتحقق مما إذا كان طالب التصنيف مالكاً أو مشاركاً في إحدى المنشآت التي تتعارض مع ممارسة مهنة الاستشارات الهندسية.
3. البيانات والوثائق الخاصة بالكادر الهندسي والفني المتخصص في تخصص الاستشارات الهندسية المطلوب مزاولته.
4. كشف مفصل بالأعمال السابقة والمشاريع التي قام بها المكتب الهندسي المطلوب ترخيصه.
5. المستندات والوثائق الدالة على سنوات الخبرة العملية في مجال التخصص المطلوب.
6. صورة من عقد تأسيس الشركة أو عقد وكيل الخدمات (حسب الحالة).
7. شهادة تأسيس المكتب الهندسي صادرة من الجهات المختصة في موطن المكتب الهندسي الرئيسي وما يثبت مزاولته العمل في نشاط الاستشارات الهندسية للمدة المطلوبة دون انقطاع (فرع المكتب الهندسي الأجنبي).
8. نسخة طبق الأصل عن التقرير المالي السنوي المدقق مستوفياً لجميع الشروط والمعايير المهنية الدولية والمعتمدة في الدولة.
9. إقرار معتمد بتفريغ كادر محاسبي متخصص أو تعاقد مع مكتب متخصص بمراجعة السجلات المحاسبية.
10. إقرار معتمد من قبل مدقق الحسابات باستيفاء المكتب الهندسي للشروط والمعايير المالية والوضع المالي المطلوب لغايات التصنيف وفقاً للتشريعات ذات العلاقة.
11. المستندات المتعلقة بالتعديلات التي طرأت على وضعية مكتب الاستشارات الهندسية (إن وجدت) خاصةً فيما يتعلق بالكادر الهندسي لمكتب الاستشارات الهندسية.
12. صورة عن التفويض الساري الصلاحية الممنوح من قبل المكتب الهندسي الأجنبي الرئيسي يفيد بتفويض أو استمرارية تفويض المدير المسؤول للقيام بأعمال المدير العام المقيم للمكتب الهندسي وذلك لمدة التصنيف المطلوبة.
13. كشف بالأعمال والمشاريع المنجزة أو التي تحت الإنجاز عن مدة سنتي التصنيف السابقتين في حال التجديد.
14. أية مستندات أو وثائق أخرى ترى الإدارة المعنية ضرورة إبرازها.
المادة (5)
ترقية التصنيف
1. يكون تصنيف المكتب الهندسي المحلي الذي يرخص لأول مرة على الفئة الثانية، مهما بلغت سنوات خبرة طالب التصنيف، ويجوز تصنيف المكتب على الفئة الأولى عند تحقق الشروط التالية:
أ. إذا كان طالب الترخيص مواطناً ومقيداً في سجل قيد المهندسين، وقد امتلك أو شارك سابقاً في مكتب هندسي في الدولة لمدة لا تقل عن (3) ثلاث سنوات.
ب. إذا توفرت لدى طالب الترخيص سنوات خبرة في مزاولة المهنة تعادل سنوات الخبرة المطلوبة للتصنيف في الفئة الأولى.
ت. إذا توفرت لدى المكتب الهندسي سابقة خبرات منجزة تتطابق مع الحد الأدنى للخبرات السابقة والمعايير المطلوبة لهذه الفئة.
2. يجوز عند التقدم بطلب تجديد تصنيف المكتب الهندسي المحلي، طلب إعادة تصنيف المكتب الهندسي إلى الفئة الأعلى من الفئة المصنف عليها بناءً على الأوضاع الفنية المستجدة لديه مرفقاً الوثائق والمستندات التالية:
أ. شهادة التصنيف الصادرة للمكتب الهندسي.
ب. كشف بعدد وأسماء الكادر الفني المتفرغ للعمل في المكتب الهندسي ومؤهلاتهم العلمية والعملية وسنوات الخبرة لديهم.
ت. كشف بمجموع مساحات الأعمال والمشاريع التي قام المكتب الهندسي بتصميمها واعتمادها ونوعية هذه المشاريع وكذلك مجموع مساحات الأعمال والمشاريع التي قام المكتب الهندسي بالإشراف على تنفيذها وإنجازها، ونوعية هذه المشاريع وذلك خلال مدة (3) ثلاث سنوات الأخيرة التي سبقت تاريخ طلب الترقية أو خلال المدة التي قضاها المكتب الهندسي في الدرجة السابقة.
3. يجوز للمكتب الهندسي المحلي التقدم بطلب ترفيع تصنيفه إلى الفئة الأعلى بعد أن تكون قد مضت سنة كاملة على تاريخ تصنيفه بالفئة الحالية.
4. يراعى عند نظر طلبات إعادة التصنيف المقدمة أن يتم تقييم المكتب الهندسي على أساس معيار حجم الكادر الفني المتفرغ لأعمال المكتب وعدد الأنشطة التي تزاولها وحجم المساحات والمشاريع المعتمدة والمنجزة طبقا لفئة المكتب ومدى مطابقتها للمعايير الفنية المعتمدة لكل عنصر من العناصر المشار إليها.
المادة (6)
مكتب هندسي طرف ثالث
1. يجوز للمكتب الهندسي المحلي التقدم بطلب تصنيف تخصصات مجال أعمال التدقيق والتفتيش على الفئة الخاصة، حيث يرخص للمصنفين على هذه الأنشطة تقديم خدمات التدقيق والتفتيش كطرف ثالث.
2. يجوز لفرع المكتب الهندسي الأجنبي التقدم بطلب تصنيف تخصصات مجال أعمال التدقيق والتفتيش المتخصص على الفئة الخاصة إذا كان الفرع الرئيسي للمكتب الهندسي الأجنبي متخصصاً في هذه التخصصات ويجب تقديم ما يثبت ذلك في طلب التصنيف.
3. يشترط على المكتب الهندسي المحلي المصنف على هذا المجال ألا يكون مؤسساً لأي من المكاتب المشاركة في الإمارة.
4. يشترط على المكتب الهندسي المصنف على هذا المجال ألا يقوم بأية أعمال أو تخصصات في مجالات استشارات هندسية أخرى.
5. يتولى العمل الهندسي لهذه التخصصات، مهندسون مقيدون في سجل قيد المهندسين بالإمارة، وبحسب التخصصات المطلوبة للنشاطات الأساسية والحد الأدنى للكادر الفني، ويتم إضافة الكوادر الفنية بحسب متطلبات كوتا مساحة المشاريع وبموجب أحكام نظام وتعليمات التصنيف.
المادة (7)
معايير تصنيف مكاتب الاستشارات الهندسية
يكون تقييم المكاتب الهندسية لغرض تصنيفها أول مرة أو تجديد أو ترفيع أو تعديل التصنيف وفقا للمعاير الفنية الواردة أدناه:
| معايير تصنيف مكاتب الاستشارات الهندسية | فئات التصنيف | |||
|---|---|---|---|---|
| الخاصة | الأولى | الثانية | ||
| 1. شكل مكتب الاستشارات الهندسية | ||||
| مكتب هندسي محلي | ☐ | ☐ | ☐ | |
| فرع مكتب هندسي أجنبي | ☐ | لا يسمح بالتصنيف | ||
| مكتب مهندس رأي | ||||
| مكتب هندسي مشارك | ||||
| 2. رأس المال المدفوع وصافي قيمة الموجودات (بالدرهم) مثل النقد، والودائع في البنوك، العقارات، السيارات والآليات، الذمم المدينة، الأعمال تحت التنفيذ، الخ | 2 مليون درهم | 1 مليون درهم | غير مطلوب | |
| 3. الخبرات السابقة خلال آخر 10 سنوات (إجمالي قيمة المشاريع المنفذة من قبل الاستشاري بالدرهم) | لا تقل عن (240) مليون، على ألا تقل قيمة أحد المشاريع عن (30) مليون | لا تقل عن (30) مليون، على ألا تقل قيمة أحد المشاريع عن (5) مليون | غير مطلوب | |
| 4. القيمة التقديرية للمشاريع التي يجوز الاشتراك فيها (بالدرهم) لمجال: | غير محددة | حتى (60) مليون | حتى (30) مليون | |
| استشارات البنية التحتية | ||||
| البنية التحتية المتخصصة | ||||
| الأعمال التخصصية | ||||
| 5. توافق عدد الكوادر الفنية والعمالة مع مساحة المشاريع (الكوتا) لمشاريع استشارات تشييد المباني | ||||
| الطوابق المصرح بتنفيذها (مجال الاستشارات الهندسية لتشييد المباني) | غير محددة الطوابق | أرضي + 9 | أرضي + 3 | |
| مساحة المشاريع المسموح بها بحسب فئة النشاط المصنف عليه (متر مربع) | 60,000 | 20,000 | 12,000 | |
| مساحة المشاريع الإضافية الممنوحة عند إضافة مهندس مقيد على الكادر الهندسي للنشاط (متر مربع) | 9,000 | 7,000 | 5,000 | |
| 6. معايير التوافق مع متطلبات الجودة والتأمين المهني | ||||
| شهادة الجودة | ISO 9001 | |||
| التأمين المهني (Professional Indemnity Insurance) | 2 مليون درهم في السنة، 200 ألف درهم لكل حادث بدون تحديد العدد | 1 مليون درهم في السنة، 100 ألف درهم لكل حادث بدون تحديد العدد | غير مطلوبة 500 ألف في السنة، 50 ألف درهم لكل حادث بدون تحديد العدد | |
| 7. الخبرات المطلوبة للكوادر الفنية لأنشطة الاستشارات الهندسية | ||||
| مجالات الاستشارات الهندسية | الخاصة | الأولى | الثانية | |
| مشاريع المباني | حدود الأعمال الطابقية | غير محدودة الطوابق | أرضي + 9 | أرضي + 3 |
| الحد الأدنى للكادر الفني من المقيدين | 4 | 2 | 1 | |
| سنوات الخبرة لكل مهندس | 10 سنوات | 7 سنوات | 4 سنوات | |
| حدود الأعمال الطابقية | غير محدودة الطوابق | أرضي + 9 | أرضي + 3 | |
| مشاريع البنية التحتية ومشاريع البنية التحتية المتخصصة والأعمال التخصصية | الحد الأدنى للكادر الفني من المقيدين | 4 | 2 | 1 |
| سنوات الخبرة لكل مهندس | 10 سنوات | 7 سنوات | 4 سنوات | |
| حدود الأعمال الطابقية | لا يوجد | لا يوجد | لا يوجد | |
| الأعمال الفنية | الحد الأدنى للكادر الفني من المقيدين | 1 | ||
| سنوات الخبرة لكل مهندس | 3 سنوات | |||
| الأعمال المساندة | حدود الأعمال الطابقية | لا يوجد | لا يوجد | لا يوجد |
| الحد الأدنى للكادر الفني من المقيدين | 1 | |||
| سنوات الخبرة لكل مهندس | 5 سنوات | |||
| أعمال التدقيق والتفتيش | حدود الأعمال الطابقية | غير محددة الطوابق | ||
| الحد الأدنى للكادر الفني من المقيدين | 4 | |||
| سنوات الخبرة لكل مهندس | 10 سنوات | |||
| فئات التصنيف للتخصص | الفئة الخاصة | |||
| قيود خاصة في حال تم التصنيف على تخصصات من هذا المجال | لا يجوز مزاولة المكتب الهندسي لأي تخصص من مجالات الاستشارات الهندسية الأخرى | |||
المادة (8)
بيانات الجهاز الفني
على المكتب الهندسي أن يرفق بطلب التصنيف الجديد، أو عند طلبه تجديد أو ترفيع أو تعديل التصنيف القائم مستندات وبيانات الكادر الفني وذلك على النحو التالي:
1. جدول يوضح أسماء المهندسين أصحاب الترخيص المصنف عليهم التخصصات المطلوبة والمهندسين المقيدين المطلوب توفيرهم حسب فئة التصنيف لكل نشاط، مع البيانات المطلوبة لسنوات الخبرة الموثقة ورقم القيد وفئته، مقسماً بحسب المجال والتخصصات المراد تصنيفها، على أن تكون جميعها مسلسلة وبحسب النموذج المعتمد من الدائرة.
2. ما يفيد إقامة المهندسين أصحاب الترخيص للتخصصات المطلوب التصنيف فيها داخل الدولة إقامة معتادة تحت كفالة المكتب الهندسي وتفرغهم للعمل لديه.
3. تقديم نسخة إلكترونية لكافة المستندات المطلوبة.
4. أية مستندات أو بيانات تطلبها الإدارة المعنية.
المادة رقم (9)
الخبرات المطلوبة للكوادر الفنية لتخصصات الاستشارات الهندسية
1. يجب أن يتوفر لدى المكتب الهندسي لكل فئة من فئات التصنيف ولكل تخصص عدد من المهندسين يتناسب مع الفئة والتخصصات المطلوب التصنيف فيها، وفقا لما يلي:
| م | مجالات الاستشارات الهندسية | الفئة | حدود الأعمال الطابقية | عدد التخصصات الإلزامية (تخصص أساسي + إضافة تخصص مرتبط به) | الحد الأدنى لعدد المهندسين المقيدين في الكادر الفني للتخصص الأساسي والتخصصات المرتبطة به | سنوات الخبرة |
|---|---|---|---|---|---|---|
| 1 | مشاريع المباني | الخاصة | غير محدودة الطوابق | 2 | 4 | 10 سنوات |
| الأولى | أرضي + 9 | 2 | 2 | 7 سنوات | ||
| الثانية | أرضي + 3 | 1 | 1 | 4 سنوات | ||
| 2 | مشاريع البنية التحتية ومشاريع البنية التحتية المتخصصة والأعمال التخصصية | الخاصة | لا يوجد | 2 | 4 | 10 سنوات |
| 3 | الأولى | 2 | 2 | 7 سنوات | ||
| 4 | الثانية | 1 | 1 | 4 سنوات | ||
| 5 | الأعمال الفنية | الثانية | لا يوجد | 1 | 1 | 3 سنوات |
| 6 | الأعمال المساندة | الثانية | لا يوجد | 1 | 1 | 5 سنوات |
| 7 | أعمال التدقيق والتفتيش | الخاصة | لا يوجد | 2 | 4 | 10 سنوات |
2. لتأمين عدد التخصصات المطلوب لكل فئة تصنيف يجب إضافة تخصص أو أكثر من التخصصات المرتبطة بالتخصص الأساسي، ويمكن للمكتب الهندسي أن يكتفي بتأمين العدد المطلوب من المهندسين أصحاب الترخيص بالتخصص، ويتم تصنيف التخصص بحسب سنوات الخبرة المتوفرة لدى صاحب الترخيص.
3. يمنح مجال الاستشارات الهندسية لمشاريع المباني، مساحة طابقية تتلاءم مع فئة التصنيف ويمكن للمكتب الهندسي إضافة مساحة مشاريع إضافية لأي تخصص، بمجرد تسجيل وإضافة مهندسين مقيدين جدد على هذا التخصص. وعند إضافة نشاط مرتبط بالنشاط الأساسي، يتم التصنيف باستخدام أحد المهندسين المتخصصين من الكادر الفني المتوفر. وفي حال عدم تواجد الاختصاص المطلوب، يتم إضافة مهندس صاحب اختصاص إلى الفريق ويتم تصنيفه بحسب سنوات الخبرة المتوفرة.
4. يحق للمكتب الهندسي إضافة تخصصات إضافية أساسية، وتخصصات إضافية مرتبطة بها لمجال أو أكثر على أن يتم تأمين الكادر الفني المناسب لها وللفئة المراد التصنيف عليها بحسب ما ورد في البند رقم (1) والبند رقم (2) من هذه المادة.
5. على المكتب الهندسي التقدم بطلب تصنيف على جميع التخصصات الضرورية لاستكمال الأعمال المزمع تصميمها والإشراف عليها وتأمين الكوتا المساحية لكافة التخصصات بما يتناسب مع طبيعة وحجم المشروع والكادر الفني المتوفر لديه، ويحق للمكتب الهندسي أن يقترض من الكوتا المساحية الخاصة بمكتب هندسي من الباطن بما يتناسب مع الكادر الفني والتخصصات المصنف عليها وبحسب الحاجة، ويتم الحجز على الكوتا المساحية المقترضة من الكوتا المساحية للمكتب الهندسي من الباطن المقترض منه لنفس النشاط.
6. لا يسمح باقتراض كوتا مساحية إلا بعد التعاقد من الباطن وتوثيق هذا التعاقد على النظام الإلكتروني لخدمات التصنيف وبحسب الإجراءات والشروط المعتمدة بموجب نظام إدارة الكوتا المساحية للمشاريع الصادر عن الدائرة.
7. يكون المكتب الهندسي مسؤولا وحده عن التنسيق مع مهندسيه ومهندسي المكتب الهندسي من الباطن لتنظيم متطلبات قيدهم وتوزيعهم على تخصصات مجالات الاستشارات الهندسية المصنف عليها، ليتم تأمين كوتا لمساحات المشاريع المطلوبة.
8. عند اكتمال إجراءات تعيين المكتب الهندسي لتصميم مشروع، يتم الحجز على كوتا مساحية من حساب التخصص الأساسي والتخصصات المرتبطة بها بحسب طبيعة المشروع والتخصصات الضرورية لإنجازه توازي (70%) من مساحة المشروع أو الأعمال المزمع تصميمها والإشراف عليها. وذلك إلى حين الموافقة على طلب الترخيص، حيث يتم تلقائيا الإفراج عن 63% من الكوتا المساحية المحجوزة، وعند إصدار الترخيص للمقاول يتم حجز كوتا مساحية بما يوازي (23%) من مساحة المشروع لأعمال الإشراف ويتم الإفراج عنها بعد إصدار شهادة الإنجاز للمشروع وذلك لكل من المكتب الهندسي الرئيسي والمكتب الهندسي من الباطن للمشروع. وفي حال تم إلغاء الترخيص، يتم الإفراج عن كافة المساحات والكوتا المحجوزة بموجبه.
9. عند تصنيف المكتب الهندسي على تخصص الاستشارات الهندسة المعمارية، يوفر المكتب الهندسي العدد المطلوب من المهندسين المتخصصين والمهندسين المقيدين الإضافيين وفقا لما هو مبين بالبند رقم (1.1) في الجدول رقم (1) من الملحق رقم (1).
المادة (10)
معايير التوافق مع متطلبات الجودة والتأمين المهني لمكاتب الاستشارات الهندسية
على المكتب الهندسي أن يرفق بطلب التصنيف، أو عند طلبه تجديد أو ترفيع أو تعديل التصنيف القائم جميع البيانات والمعلومات والمستندات المتعلقة بما يلي بحسب متطلبات ومعايير تصنيف المكاتب الهندسية، والمذكورة سابقاً في المادة رقم (7):
أ. شهادة الجودة
ب. وثيقة التأمين المهني.
المادة (11)
معيار الخبرات السابقة والقيمة التقديرية للمشاريع التي يجوز الاشتراك بها
1. يجب أن تتوفر لدى المكتب الهندسي خبرات في التصميم والإشراف على المشاريع خلال السنوات (10) العشر السابقة لتاريخ تقديم طلب التصنيف، تتناسب من حيث النوع والحجم مع فئة التصنيف والمجالات المطلوبة.
2. تكون القيمة التقديرية للمشاريع التي يجوز للمكتب الهندسي الاشتراك فيها بحسب فئة تصنيفه في مجال استشارات البنية التحتية والبنية التحتية المتخصصة والأعمال التخصصية، وذلك كما هو مفصل في معايير تصنيف المكاتب الهندسية المذكورة في المادة رقم (7).
المادة (12)
بيانات المشاريع المنفذة
تقبل بيانات المشاريع المنفذة من قبل مكتب الهندسي وفقاً لما يلي:
1. أن تكون مشفوعة بعقود وشهادات إنجاز رسمية أو شهادات الدفعات الختامية توضح نسبة العمل المنجز للمشاريع المنفذة لجهات حكومية وشبه الحكومية داخل الدولة.
2. يجوز قبول خبرات المشاريع المنفذة خارج الدولة بشرط أن تكون مثبتة بشهادات تنفيذ صادرة من جهات حكومية في الدولة التي نفذت بها وموثقة بحسب الأصول المعمول بها في الإمارة.
3. يعاد تصنيف المكتب الهندسي في الفئة المناسبة عند انسحاب أي من الشركاء الذين تم تصنيف المكتب الهندسي بناء على خبراتهم.
4. لتصنيف فرع داخل الإمارة تقبل خبرات المشاريع المنفذة من قبل المركز الرئيسي أو أحد فروعه، شريطة تقديم شهادات رسمية موثقة بحسب الأصول المعمول بها بالإمارة، تؤكد أن الفروع مملوكة بالكامل للمركز الرئيسي مع تقديم تعهد من المركز الرئيسي بتحمل كافة المسؤوليات والالتزامات.
5. للمكتب الهندسي المحلي الاستفادة من خبرات الشريك الأجنبي شريطة ألا تقل حصته في رأس المال عن (30%) إذا كان شخصاً اعتبارياً واحداً وعن (20%) لكل منهما إذا كانا شخصين اعتباريين وعن (15%) لكل منهم إذا كانوا أكثر من شخصين اعتباريين.
6. للمكتب الهندسي المحلي في الإمارة الذي أسس فروعاً له في إمارات الدولة الأخرى الاستفادة من الخبرات المنفذة لهذه الفروع من أجل تصنيف المكتب الهندسي في الإمارة.
7. مع عدم الإخلال بأحكام البنود السابقة لهذه المادة، تقبل خبرات المشاريع المنفذة في الدولة، من قبل مكتب هندسي مشارك مرخص في الإمارة، لدى تقديمها مرفقة لطلب تجديد أو ترفيع تصنيف مكتب هندسي محلي مؤسس أو لطلب تصنيف جديد لفرع مكتب هندسي أجنبي، كان الفرع الرئيسي للمكتب الهندسي الأجنبي شريكا فيه، بشرط توفير مقدم الطلب للآتي:
أ. شهادة براءة ذمة من صاحب العمل عن انتهاء سريان مسؤوليته عن عيوب التصميم.
ب. أو شهادة تثبت وجود تأمين مهني خاص بالمشروع المنفذ، ساري ومستوفي شروط صاحب العمل موضحاً مدة سريان مسؤوليته عن عيوب التصميم.
8. لا يعتد بخبرة المشاريع المنفذة من الباطن غير الموثقة على النظام الإلكتروني، إلا إذا كانت مشفوعة بالآتي:
أ. كتاب اعتماد مكتب هندسي من الباطن من الجهة مالكة المشروع.
ب. عقد الباطن والعقد الرئيسي.
ت. طلب ترخيص البناء ورخصة البناء للمشروع المذكور، موضحة فيهما بيانات المكتب الهندسي وبيانات ونطاق عمل المكتب الهندسي من الباطن.
ث. شهادة الإنجاز من جهات تقبلها الدائرة.
ج. نسخة عن شهادة الإشغال للمباني المنجزة بعد أكثر من سنة من نفاذ أحكام نظام التصنيف.
9. على المكتب الهندسي تقديم شهادة دفعة اكتمال التصميم ودفعات الإشراف أو ما يثبت اعتماد التصميم ونسبة الإنجاز للمشاريع التي قام بالإشراف عليها لصالح القطاع الخاص معتمدة من المالك أو من ينوب عنه وكشف حساب يوضح إيداع هذه الدفعة في حسابه مع عقد الاستشارات الهندسية وشهادة رسمية بالإنجاز، ويجوز للدائرة أن تطلب من المكتب الهندسي أن يزودها بوثائق بديلة عما ذكر أعلاه وذلك حسب متطلبات كل حالة.
10. إذا رغب المكتب الهندسي في الاستفادة من أية مشاريع تتضمن أكثر من تخصص من أجل التصنيف أو الترفيع، فعليه تقديم وثائق ومستندات توضح قيمة وطبيعة كل تخصص على حدة من خلال تقديم ملخص لجدول حساب الكميات الخاص بالمشروع على أن يكون معتمداً من المالك.
11. لا يعتد بخبرات الشخص الطبيعي كخبرة مشاريع منفذة في التصنيف.
12. في حالة قيام عدة مكاتب هندسية بتنفيذ مشروع أو أكثر وأراد أي منهم الاستفادة من خبراته في هذا المشروع للتصنيف، فعليه تقديم ما يفيد وجود الائتلاف بينهم وكذلك ما يفيد طبيعة الأعمال التي قام بها كل عضو من أعضاء الائتلاف ونسبة هذه الأعمال من إجمالي قيمة المشروع ويتم احتساب قيمة الأعمال المنجزة من قبل المكتب الهندسي طالب التصنيف فقط وذلك حسب نسب الإنجاز الفعلية.
13. لا يجوز استخدام أي خبرات لتصنيف المكتب الهندسي أكثر من مرة في نفس التخصص.
المادة (13)
تخصصات ومجالات الاستشارات الهندسية
1. مع عدم الإخلال باختصاص اللجنة الفنية في التوصية باعتماد تحديث أو تعديل التخصصات والفروع الهندسية، تحدد التخصصات الهندسية التي يجوز تصنيف مكاتب الاستشارات الهندسية فيها بحسب أحكام التعليمات الصادرة بموجب هذا القرار.
2. تكون الأنشطة الواردة أدناه مخصصة لمزاولة مهنة الاستشارات الهندسية:
1. مجال الاستشارات الهندسية لمشاريع المباني.
2. مجال الاستشارات الهندسية لمشاريع البنية التحتية.
3. مجال الاستشارات الهندسية لمشاريع البنية التحتية المتخصصة.
4. مجال الاستشارات الهندسية للأعمال التخصصية.
5. مجال الاستشارات الهندسية للأعمال الفنية.
6. مجال الاستشارات الهندسية للأعمال المساندة.
7. مجال الاستشارات الهندسية لأعمال التدقيق والتفتيش.
8. أي من المجالات والتخصصات التي توصي اللجنة الفنية باعتمادها وإصدارها مستقبلاً.
3. يراعى توافر تخصصات بالكادر الفني لدى المكتب الهندسي، تبعاً للتخصص والفئة المصنف فيها ولمجالات وتخصصات الاستشارات الهندسية الصادرة بموجب الملحق المرفق بهذا القرار.
المادة (14)
المعايير المالية والوضع المالي
1. لغايات التصنيف من الناحية المالية يجب أن يمتلك مكتب الاستشارات الهندسية موجودات مقبولة لغايات التصنيف بقيمة تغطي القيمة الإجمالية للالتزامات بالإضافة إلى رأس المال المدفوع لكل فئة كحد أدنى للتصنيف في كل فئة وفقاً لما يلي:
| البيان | المعايير المالية والوضع المالي | ||
|---|---|---|---|
| الخاصة | الأولى | الثانية | |
| رأس المال المدفوع وصافي قيمة الموجودات المقبولة لغايات التصنيف (بالدرهم) | 2,000,000 | 1,000,000 | غير مطلوب |
وعلى المكتب الهندسي الاحتفاظ بسجلات محاسبية وإصدار قوائم مالية سنوية مدققة وفق المعايير المهنية الدولية والتشريعات ذات العلاقة.
2. الموجودات المقبولة لغايات التصنيف هي الموجودات المعروضة في ميزانية المكتب الهندسي الحقيقية الموجودة داخل الدولة والمعززة بمؤيدات ثبوتية والمملوكة قانونيا باسم المكتب الهندسي طالب التصنيف حصراً والتي يمكن تسييلها (تحويلها إلى نقد) عند الطلب، حيث يمكن اعتبار الموجودات المبينة تالياً مقبولة لغايات التصنيف وفقاً للاشتراطات التي تحددها الدائرة وكما يلي:
أ. النقد والودائع في البنوك.
ب. العقارات.
ت. السيارات والآليات.
ث. الذمم المدينة التي تم إثبات تحصيلها بعد تاريخ الميزانية.
ج. الأعمال تحت التنفيذ في حال تم فوترتها وتحصيل قيمتها بعد تاريخ الميزانية.
ح. الذمم المدينة المصادق على صحة أرصدتها من قبل الجهات الحكومية.
خ. الذمم التجارية المدينة المصادق على صحة أرصدتها من قبل الجهات التي لا ينطبق عليها تعريف الأطراف ذات العلاقة، على ألا يكون قد مضى أكثر من سنة على تاريخ استحقاق السداد.
د. الذمم المدينة الصادر بها أحكام تنفيذ نهائية، على ألا يزيد عمر حكم التنفيذ عن سنة من تاريخ صدوره.
ذ. التأمينات وما في حكمها.
ر. المصاريف المدفوعة مقدماً وما في حكمها.
ز. أية موجودات أخرى توافق عليها الدائرة.
3. يتم دراسة وتقييم الوضع المالي للمكتب الهندسي من قبل المدقق المعتمد أو من قبل أي جهة تحددها الدائرة وفقا للنموذج والاشتراطات التي تحددها الدائرة لهذه الغاية.
4. تحتفظ الدائرة بسجل البيانات المالية للمكتب الهندسي ضمن برنامج إلكتروني خاص بتخزين وتحليل البيانات المالية.
5. يحدد تاريخ موحد للتقرير المالي السنوي المدقق المستخدم في تصنيف المكتب الهندسي الذي ينطبق عليه تعريف "الأطراف ذات العلاقة" وفق المعايير المهنية الدولية.
6. للدائرة استحداث معايير مالية أخرى مكملة أو بديلة.
7. للدائرة عدم الاعتداد بالتقييم المقدم في حال عدم استيفاء الميزانية المقدمة للمعايير المهنية أو متى استدعت الحاجة لذلك وبالاستناد إلى توصيات أصحاب الاختصاص.
المادة (15)
مدير المكتب الهندسي
في حال كان مالك المكتب الهندسي مواطناً وغير مهندس مقيد، يجب عليه تعيين مدير مسؤول من بين أعضاء الجهاز الفني للمكتب الهندسي توكل إليه مهام التوقيع والتصرف نيابة عن المكتب شريطة ما يلي:
1. أن يكون مهندساً مقيداً في سجل قيد المهندسين.
2. أن يكون متفرغاً لأعمال المكتب الهندسي.
3. أن تتوفر لديه مدة الخبرة الواجب توفرها وفقاً لأحكام النظام وتعليمات التصنيف.
المادة (16)
عقد الاستشارات الهندسية
يجب على المكتب الهندسي إبرام عقد استشارات هندسية مع مالك المشروع أو من يمثله على أن يتضمن ما يلي :
1. تحديد الأشخاص أطراف العقد تحديداً دقيقاً.
2. تحديد نطاق العمل وتخصصات الاستشارات الهندسية محل العقد.
3. المدة التعاقدية المتفق عليها لتنفيذ الأعمال أو الخدمات الهندسية.
4. التكلفة المالية التقديرية للمشروع.
5. تحديد الأتعاب المتفق عليها وكيفية سدادها.
6. واجبات المكتب الهندسي الرئيسي وواجبات المكاتب الهندسية المتوقع التعاقد معها من الباطن، سواء تعلقت بإعداد الدراسات أو التصاميم أو المخططات أو الإشراف على التنفيذ.
7. حالات إنهاء العقد والشروط الجزائية والغرامات (إن وجدت).
8. تحديد القانون الواجب تطبيقه عند وقوع أي نزاع حول تنفيذ العقد والجهة القضائية المختصة بالنظر في النزاع.
المادة (17)
يلغى كل نص يخالف أو يتعارض مع أحكام هذا القرار.
المادة (18)
يُنشر هذا القرار في الجريدة الرسمية، ويُعمل به ابتداءً من الثالث من مارس 2019.
صدر
بتاريخ : 29 / 12 / 1439 هـ
الموافق 9 / 9 /2018 م
فلاح محمد الأحبابي
رئيس دائرة التخطيط العمراني والبلديات
ملحق القرار الإداري رقم (163) لسنة 2018
تخصصات ومجالات الاستشارات الهندسية في الإمارة
1- مجال الاستشارات الهندسية لمشاريع المباني:
| رمز نشاط أساسي | رمز نشاط فرعي | التخصص | تخصص المهندس (صاحب الاختصاص) | ملاحظات |
|---|---|---|---|---|
| 1.1 | استشارات الهندسة المعمارية | مهندس معماري ومهندس مدني | تخصص أساسي لجميع تخصصات مشاريع المباني | |
| 1.1.1 | استشارات هندسة المباني الخضراء | مهندس معماري و مهندس مدني | تخصص أساسي | |
| 1.1.2 | استشارات هندسية في البيئة والاستدامة | مهندس معماري ذو خبرة في الاختصاص | تخصص أساسي ومرتبط بالتخصص رقم (1.1) | |
| 1.2 | استشارات الهندسة المدنية للمباني | مهندس مدني | ||
| 1.2.1 | استشارات هندسة الأساسات وميكانيكا التربة | مهندس مدني | ||
| 1.3 | استشارات الهندسة الميكانيكية للمباني | مهندس ميكانيكي | ||
| 1.3.1 | استشارات هندسة التكييف والتبريد والتدفئة والتهوية للمباني | مهندس ميكانيكي | ||
| 1.3.2 | استشارات هندسة السلامة والوقاية من الحريق للمباني | مهندس ميكانيكي | ||
| 1.3.3 | استشارات هندسة المياه والصرف الصحي والري للمباني | مهندس مدني | ||
| 1.4 | استشارات هندسة الشبكات الكهربائية للمباني | مهندس كهربائي أو مهندس إلكتروني | ||
| 1.4.1 | استشارات هندسة شبكات الاتصالات للمباني | مهندس كهربائي أو مهندس اتصالات |
2 - مجال الاستشارات الهندسية لمشاريع البنية التحتية:
| رمز نشاط أساسي | رمز نشاط فرعي | التخصص | تخصص المهندس (صاحب الاختصاص) | ملاحظات |
|---|---|---|---|---|
| 2.1 | استشارات هندسة الطرق والمرور | مهندس مدني | تخصص أساسي | |
| 2.1.1 | استشارات هندسية في الطرق الداخلية | مهندس مدني | ||
| 2.1.2 | استشارات هندسية في الجسور | مهندس مدني | ||
| 2.1.3 | استشارات هندسية في الأنفاق | مهندس مدني | ||
| 2.1.4 | استشارات هندسية في السدود والأعمال الهيدروليكية والجيولوجية | مهندس مدني أو مهندس جيولوجي | ||
| 2.1.5 | استشارات هندسة الصرف الصحي وجمع والتخلص من المياه المهدرة | مهندس مدني | ||
| 2.1.6 | استشارات هندسية في إنارة الشوارع | مهندس كهربائي | ||
| 2.1.7 | استشارات هندسية في تخطيط المرور ووسائل النقل | مهندس مدني أو مهندس مرور | ||
| 2.1.8 | استشارات هندسة حصر التربة وتصنيفها | مهندس زراعي أو مهندس مدني أو مهندس جيولوجي | ||
| 2.2 | استشارات هندسية في نقل وتوزيع المياه | مهندس ميكانيكي أو مهندس مدني | تخصص أساسي | |
| 2.3 | استشارات نقل وتوزيع الطاقة | مهندس كهربائي أو مهندس متخصص | ||
| 2.3.1 | استشارات هندسة الشبكات الكهربائية والتوزيع | مهندس كهربائي | ||
| 2.4 | استشارات هندسية في نقل الغاز والنفط | مهندس بترول أو مهندس ميكانيكي | تخصص أساسي | |
| 2.4.1 | استشارات الهندسة الكيميائية وهندسة البترول | مهندس بترول أو مهندس كيميائي | ||
| 2.4.2 | استشارات هندسة تكرير البترول | مهندس بترول أو مهندس كيميائي | ||
| 2.4.3 | استشارات هندسة بناء أنابيب خزانات النفط والغاز | مهندس ميكانيكي | ||
| 2.4.4 | استشارات هندسة وحدات تكرير البترول | مهندس بترول أو مهندس كيميائي | ||
| 2.4.5 | استشارات هندسة استخلاص الغازات | مهندس كيميائي | ||
| 2.4.6 | استشارات هندسة البتروكيماويات | مهندس بترول أو مهندس كيميائي | ||
| 2.4.7 | استشارات هندسة تركيب الخامات | مهندس بترول أو مهندس كيميائي | ||
| 2.5 | استشارات هندسية في السكك الحديدية | مهندس مدني أو مهندس ميكانيكي أو مهندس سكك حديدية | تخصص أساسي |
3- مجال الاستشارات الهندسية لمشاريع البنية التحتية المتخصصة:
| رمز نشاط أساسي | رمز نشاط فرعي | التخصص | تخصص المهندس (صاحب الاختصاص) | ملاحظات |
|---|---|---|---|---|
| 3.1 | استشارات هندسة المطارات والنقل الجوي | مهندس مدني | تخصص أساسي ويتطلب نشاط رقم (1.1) | |
| 3.2 | استشارات هندسة إنشاء وتطوير سكك الحديد | مهندس مدني أو مهندس ميكانيكي أو مهندس سكك حديدية | تخصص أساسي ويتطلب نشاط رقم (1.1) | |
| 3.3 | استشارات هندسة الموانئ البحرية والنقل البحري | مهندس مدني أو مهندس بحري | تخصص أساسي ويتطلب نشاط رقم (1.1) | |
| 3.4 | استشارات هندسية في منشآت النفط والغاز | مهندس بترول أو مهندس ميكانيكي أو مهندس مدني | تخصص أساسي ويتطلب نشاط رقم (1.1) | |
| 3.5 | استشارات هندسية في محطات تحلية المياه | مهندس مدني أو مهندس ميكانيكي | تخصص أساسي ويتطلب نشاط رقم (1.1) | |
| 3.6 | استشارات هندسية في محطات الطاقة | مهندس كهربائي | تخصص أساسي ويتطلب نشاط رقم (1.1) | |
| 3.7 | استشارات المنشآت الكهربائية | مهندس كهربائي أو مهندس متخصص | تخصص أساسي ويتطلب نشاط رقم (1.1) |
4- مجال الاستشارات الهندسية للأعمال التخصصية:
| رمز نشاط أساسي | رمز نشاط فرعي | التخصص | تخصص المهندس (صاحب الاختصاص) | ملاحظات |
|---|---|---|---|---|
| 4.1 | استشارات هندسة الترميم والمحافظة على الآثار | مهندس مدني أو مهندس معماري (حاصل على شهادات متخصصة) | تخصص أساسي | |
| 4.2 | استشارات هندسة التخطيط العمراني الشامل | مهندس معماري او مهندس تخطيط | تخصص أساسي | |
| 4.3 | استشارات هندسية في التخطيط البيئي | مهندس بيئي أو مهندس لديه خبرة في مجال التخصص | تخصص أساسي | |
| 4.3.1 | استشارات هندسية في التحكم في تلوث البيئة ووسائل حمايتها | مهندس بيئي أو مهندس لديه خبرة في مجال التخصص | ||
| 4.4 | استشارات هندسية في الطاقة البديلة والمحافظة عليها | مهندس متخصص | تخصص أساسي | |
| 4.5 | استشارات الهندسة المساحية | مهندس مدني أو مهندس مساحة | تخصص أساسي | |
| 4.5.1 | استشارات هندسة التخطيط المساحي والتصوير الجوي ونظم أدارة المعلومات | مهندس مدني أو مهندس مساحة | ||
| 4.5.2 | استشارات هندسة المساحة الجيوديسية | مهندس مساحة أو مهندس جيولوجي أو مهندس جيوديسي | ||
| 4.5.3 | استشارات هندسية في مساحة الأراضي | مهندس مدني أو مهندس مساحة | ||
| 4.5.4 | استشارات هندسة المساحة البحرية | مهندس بحري | ||
| 4.6 | استشارات هندسية في الطاقة البديلة والمحافظة عليها | مهندس متخصص | تخصص أساسي |
5- مجال الاستشارات الهندسية للأعمال الفنية:
| رمز نشاط أساسي | رمز نشاط فرعي | التخصص | تخصص المهندس (صاحب الاختصاص) | ملاحظات |
|---|---|---|---|---|
| 5.1 | استشارات الهندسة الإلكترونية | مهندس إلكتروني | تخصص أساسي | |
| 5.1.1 | استشارات هندسة الأجهزة الإلكترونية | مهندس إلكتروني | ||
| 5.1.2 | استشارات الهندسة في المعدات الطبية | مهندس إلكتروني أو مهندس معدات طبية | ||
| 5.1.3 | استشارات هندسية في الخدمات الطبية والمختبرات | مهندس إلكتروني أو مهندس معدات طبية | ||
| 5.1.4 | استشارات هندسة أجهزة الطيران | مهندس إلكتروني أو مهندس طيران | ||
| 5.2 | استشارات هندسية في الحاسب الآلي | مهندس كمبيوتر أو تقنية معلومات | تخصص أساسي | |
| 5.3 | استشارات هندسة الأرصاد الجوي | مهندس طيران أو متخصص أرصاد جوية | تخصص أساسي | |
| 5.4 | استشارات هندسة الطيران | مهندس طيران أو مهندس ميكانيكي | تخصص أساسي | |
| 5.5 | استشارات هندسة القوى والتحكم الآلي | مهندس ميكانيكي أو مهندس كهربائي | تخصص أساسي | |
| 5.5.1 | استشارات هندسة القوى الميكانيكية | مهندس ميكانيكي | ||
| 5.5.2 | استشارات هندسة ميكانيكا السوائل | مهندس ميكانيكي | ||
| 5.5.3 | استشارات هندسة ميكانيكا الآلات | مهندس ميكانيكي | ||
| 5.6 | استشارات هندسة الآليات الثقيلة | مهندس ميكانيكي | تخصص أساسي | |
| 5.7 | استشارات هندسة السيارات | مهندس ميكانيكي | تخصص أساسي | |
| 5.8 | استشارات هندسة بناء السفن | مهندس بحري أو مهندس ميكانيكي | تخصص أساسي | |
| 5.9 | استشارات هندسية في استصلاح الأراضي وتحسين التربة | مهندس زراعي أو مهندس مدني أو مهندس جيولوجي | تخصص أساسي | |
| 5.9.1 | استشارات هندسية في الزراعة والميكنة الزراعية | مهندس زراعي أو مهندس ميكانيكي | ||
| 5.9.2 | استشارات هندسية في مصادر الري | مهندس زراعي أو مهندس مدني أو مهندس جيولوجي | ||
| 5.9.3 | استشارات هندسية في حصر التربة وتصنيفها | مهندس زراعي أو مهندس مدني أو مهندس جيولوجي | ||
| 5.9.4 | استشارات هندسية في الثروات الحيوانية | مهندس زراعي أو مهندس مدني أو مهندس جيولوجي | ||
| 5.10 | استشارات هندسة المناجم والتعدين والهندسة الجيولوجية | مهندس جيولوجي أو مهندس تعدين | تخصص أساسي | |
| 5.10.1 | استشارات هندسة المعادن | مهندس جيولوجي أو مهندس تعدين | ||
| 5.10.2 | استشارات هندسة معدات المناجم والتعدين | مهندس صناعي أو مهندس ميكانيك | ||
| 5.10.3 | استشارات هندسة الجيوفيزياء والجيوكيمياء والجيوميكانيك | مهندس جيولوجي أو مهندس تعدين | ||
| 5.10.4 | استشارات هندسة الحفر والمخزون والإنتاج | مهندس كيميائي أو مهندس جيولوجي أو مهندس فيزيائي أو مهندس ميكانيك | ||
| 5.11 | استشارات الهندسة الفيزيائية | مهندس فيزيائي | تخصص أساسي |
6- مجال الاستشارات الهندسية للأعمال المساندة:
| رمز نشاط أساسي | رمز نشاط فرعي | التخصص | تخصص المهندس (صاحب الاختصاص) | ملاحظات |
|---|---|---|---|---|
| 6.1 | استشارات إدارة مشاريع التشييد | ماجستير إدارة مشاريع بعد الحصول على بكالوريوس في الهندسة أو مهندس متخصص في إدارة مشاريع التشييد | تخصص أساسي | |
| 6.1.1 | استشارات إدارة المشاريع الهندسية الصناعية | ماجستير إدارة مشاريع بعد الحصول على بكالوريوس في الهندسة أو مهندس لديه خبرة في إدارة المشاريع الهندسية الصناعية | ||
| 6.1.2 | استشارات إدارة المشاريع الهندسية الزراعية | ماجستير إدارة مشاريع بعد الحصول على بكالوريوس في الهندسة أو مهندس لديه خبرة في إدارة المشاريع الهندسية الزراعية | ||
| 6.1.3 | استشارات التحكيم لمشاريع التشييد | ماجستير إدارة مشاريع بعد الحصول على بكالوريوس في الهندسة أو مهندس لديه خبرة في إدارة مشاريع التشييد | ||
| 6.1.4 | استشارات هندسية في تحليل المطالبات | ماجستير إدارة مشاريع بعد الحصول على بكالوريوس في الهندسة أو مهندس لديه خبرة إدارة مشاريع التشييد | ||
| 6.1.5 | استشارات حساب وحصر الكميات للمشاريع الهندسية | مهندس مدني أو مهندس حساب كميات | ||
| 6.1.6 | استشارات الإدارة الهندسية في دراسة الجدوى الفنية | ماجستير إدارة مشاريع بعد الحصول على بكالوريوس في الهندسة أو مهندس لديه خبرة في إدارة مشاريع التشييد | ||
| 6.1.7 | استشارات التحكيم للمشاريع الهندسية | ماجستير إدارة مشاريع بعد الحصول على بكالوريوس في الهندسة أو مهندس لديه خبرة في إدارة المشاريع الهندسية | ||
| 6.2 | استشارات هندسة تجميل تنسيق المواقع | مهندس معماري | تخصص أساسي | |
| 6.3 | استشارات هندسة التصميم الداخلي | مهندس معماري أو مهندس تصميم داخلي | تخصص أساسي | |
| 6.4 | استشارات هندسة التصنيع والمواد | مهندس صناعي أو مهندس كيميائي | تخصص أساسي | |
| 6.4.1 | استشارات هندسة الإنتاج الصناعي | مهندس صناعي أو مهندس ميكانيكي | ||
| 6.4.2 | استشارات هندسية في الصناعات الكيميائية | مهندس صناعي أو مهندس كيميائي | ||
| 6.4.3 | استشارات هندسية في الصناعات التعدينية | مهندس صناعي أو مهندس تعدين | ||
| 6.4.4 | استشارات هندسية في الصناعات الغذائية | مهندس صناعي | ||
| 6.4.5 | استشارات هندسة اللدائن | مهندس كيميائي |
7- مجال الاستشارات الهندسية لأعمال التدقيق والتفتيش:
| رمز نشاط أساسي | رمز نشاط فرعي | التخصص | تخصص المهندس (صاحب الاختصاص) | ملاحظات |
|---|---|---|---|---|
| 7.1 | التدقيق على المخططات الإنشائية | مهندس إنشائي | تخصص أساسي | |
| 7.2 | التدقيق على المخططات غير الإنشائية | مهندس متخصص | تخصص أساسي لأعمال التدقيق على المخططات غير الإنشائية | |
| 7.2.1 | التدقيق على المخططات الكهربائية | مهندس كهربائي | ||
| 7.2.2 | التدقيق على المخططات الميكانيكية | مهندس ميكانيكي | ||
| 7.2.3 | التدقيق على مخططات السلامة والوقاية من الحريق وأنظمة مكافحة الحريق | مهندس ميكانيكي | ||
| 7.3 | التفتيش على الأعمال والعناصر الإنشائية الخاصة بالمباني | مهندس إنشائي | تخصص أساسي لجميع أعمال التفتيش | |
| 7.4 | التفتيش على الأعمال والعناصر غير الإنشائية بالمباني | مهندس متخصص | تخصص أساسي لجميع أعمال التفتيش للعناصر غير الإنشائية | |
| 7.4.1 | التفتيش على الأعمال والأنظمة الكهربائية بالمباني | مهندس كهربائي | ||
| 7.4.2 | التفتيش على الأعمال والأنظمة الميكانيكية بالمباني | مهندس ميكانيكي | ||
| 7.4.3 | التفتيش على الأعمال وأنظمة السلامة والوقاية من الحريق وأنظمة مكافحة الحريق بالمباني | مهندس ميكانيكي |
Administrative Decision No. (163) of 2018
Regarding the Instructions for the Classification of Engineering Consulting Offices in the Emirate of Abu Dhabi
The Chairman of the Department of Urban Planning and Municipalities
Having reviewed Law No. (1) of 1974 on the Reorganization of the Governmental Apparatus in the Emirate of Abu Dhabi and its amendments,
And Law No. (4) of 1983 concerning the Regulation of Construction Works, its amendments, its executive regulations, and their amendments,
And Law No. (5) of 2018 on the establishment of the Department of Urban Planning and Municipalities,
And Emiri Decree No. (13) of 2017 on the restructuring of the Executive Council of the Emirate of Abu Dhabi,
And the decision of the Chairman of the Executive Council No. (20) of 2018 concerning additional competencies for the Department of Urban Planning and Municipalities,
And the decision of the Chairman of the Department of Economic Development No. (1) of 2009 concerning the classification system for engineering consulting offices in the Emirate of Abu Dhabi,
And Administrative Decision No. (56) of 2010 issued by the Department of Economic Development, concerning the instructions for the classification of contractors,
And Administrative Decision No. (69) of 2010 concerning the amendment of the table of violations of economic establishments in the Emirate of Abu Dhabi attached to Law No. (2) of 2009 on the establishment of the Department of Economic Development,
And Administrative Decision No. (6) of 2018 concerning the registration system for a third-party office for auditing and inspection of engineering projects in the Emirate of Abu Dhabi,
And Administrative Decision No. (158) of 2018 concerning the system for the registration of engineers in the Emirate of Abu Dhabi,
And Administrative Decision No. (159) of 2018 concerning the instructions for the registration of engineers in the Emirate of Abu Dhabi,
And Administrative Decision No. (162) concerning the classification system for engineering consulting offices in the Emirate of Abu Dhabi,
Has decided the following:
Article (1)
Scope of Application
The provisions of these instructions shall apply to all engineering offices that practice engineering consulting works in the Emirate according to the approved specializations mentioned in the provisions of this decision.
Article (2)
The Register
1. A register shall be established in the Department called the (Register of Classification of Engineering Consulting Offices), in which all data of the classified engineering offices shall be recorded, and it shall contain the following information and data:
a. The Engineering Office.
b. The field, specialization, and classification category.
c. The academic qualifications and practical experience of the license holder for each specialization.
d. The academic qualifications and practical experience of the technical staff.
e. The projects on which the classification was based.
f. The financial position on which the classification was based.
g. The quality certificates obtained by the engineering office.
h. The professional liability insurance documents of the engineering office.
i. The academic qualifications and practical experience of the office manager.
j. The projects currently being designed or supervised.
k. The evaluation of the efficiency of the completed works.
l. The requirements for engineering excellence.
2. Any interested party has the right to view the registers and request a certificate of the data recorded in the register, provided that the request is in writing and the prescribed fees are paid.
Article (3)
Classification Categories for Engineering Consulting Offices
1. A local engineering office shall be classified in the Special, First, or Second category.
2. A branch of a foreign engineering office, a joint engineering office, and an expert engineer office shall be classified in the Special category only.
3. An engineering office may not carry out engineering consulting works except in the category it is classified in and the categories below it, in accordance with the provisions of the classification system and instructions.
Article (4)
Attachments for the Classification Application
The engineering office must attach the following data and documents to the new classification application, or when requesting renewal, upgrade, or amendment:
1. A copy of a valid commercial license that includes the specializations for which classification is requested.
2. A statement issued by the Department of Economic Development showing the commercial licenses owned by the license holder to verify whether the classification applicant owns or participates in any establishments that conflict with the practice of the engineering consulting profession.
3. Data and documents related to the specialized engineering and technical staff in the engineering consulting specialization to be practiced.
4. A detailed list of previous works and projects carried out by the engineering office requesting the license.
5. Documents and records indicating the years of practical experience in the required field of specialization.
6. A copy of the company's articles of association or service agent contract (as applicable).
7. A certificate of establishment of the engineering office issued by the competent authorities in the home country of the main engineering office, and proof of its continuous practice of engineering consulting for the required period (for a branch of a foreign engineering office).
8. A true copy of the audited annual financial report that meets all international professional standards and is accredited in the state.
9. A certified declaration of assigning a specialized accounting staff or contracting with a specialized office to review the accounting records.
10. A certified declaration from the auditor that the engineering office meets the financial conditions and standards and the required financial position for the purposes of classification in accordance with the relevant legislation.
11. Documents related to any changes that have occurred in the status of the engineering consulting office (if any), especially with regard to the engineering staff of the consulting office.
12. A copy of the valid authorization granted by the main foreign engineering office, stating the authorization or continuation of the authorization of the responsible manager to act as the resident general manager of the engineering office for the required classification period.
13. A list of completed or ongoing works and projects for the two previous classification years in the case of renewal.
14. Any other documents or records that the concerned department deems necessary to be presented.
Article (5)
Classification Upgrade
1. The classification of a local engineering office licensed for the first time shall be in the Second category, regardless of the applicant's years of experience. The office may be classified in the First category if the following conditions are met:
a. If the license applicant is a national and is registered in the engineers' register, and has previously owned or participated in an engineering office in the country for a period of not less than (3) three years.
b. If the license applicant has years of experience in practicing the profession equivalent to the years of experience required for classification in the First category.
c. If the engineering office has a record of completed experiences that match the minimum previous experience and standards required for this category.
2. When applying for the renewal of a local engineering office's classification, a request may be made to reclassify the office to a higher category than its current one based on its updated technical status, with the following documents and records attached:
a. The classification certificate issued to the engineering office.
b. A list of the number and names of the full-time technical staff working at the engineering office, their academic and practical qualifications, and their years of experience.
c. A statement of the total area of works and projects designed and approved by the engineering office, the type of these projects, as well as the total area of works and projects supervised and completed by the engineering office, and the type of these projects during the last (3) three years preceding the date of the upgrade request or during the period the engineering office spent in the previous grade.
3. A local engineering office may apply to upgrade its classification to the next higher category after one full year has passed since the date of its classification in the current category.
4. When considering reclassification requests, the engineering office shall be evaluated based on the criteria of the size of the full-time technical staff, the number of activities it practices, the size of the areas and projects approved and completed according to the office's category, and the extent of their compliance with the approved technical standards for each of the mentioned elements.
Article (6)
Third-Party Engineering Office
1. A local engineering office may apply for the classification of specializations in the field of auditing and inspection in the Special category, where those classified in these activities are licensed to provide third-party auditing and inspection services.
2. A branch of a foreign engineering office may apply for the classification of specializations in the field of specialized auditing and inspection in the Special category if the main branch of the foreign engineering office specializes in these fields, and proof of this must be submitted with the classification application.
3. It is required that the local engineering office classified in this field is not the founder of any of the participating offices in the Emirate.
4. It is required that the engineering office classified in this field does not carry out any works or specializations in other engineering consulting fields.
5. The engineering work for these specializations shall be undertaken by engineers registered in the Emirate's engineers' register, according to the required specializations for the basic activities and the minimum technical staff. Technical staff shall be added according to the project area quota requirements and under the provisions of the classification system and instructions.
Article (7)
Classification Criteria for Engineering Consulting Offices
The evaluation of engineering offices for the purpose of their initial classification, renewal, upgrade, or amendment of classification shall be in accordance with the technical criteria listed below:
| Classification Criteria for Engineering Consulting Offices | Classification Categories | |||
|---|---|---|---|---|
| Special | First | Second | ||
| 1. Form of the Engineering Consulting Office | ||||
| Local Engineering Office | ☐ | ☐ | ☐ | |
| Branch of a Foreign Engineering Office | ☐ | Classification not permitted | ||
| Expert Engineer Office | ||||
| Joint Engineering Office | ||||
| 2. Paid-up Capital and Net Value of Assets (in AED) such as cash, bank deposits, real estate, vehicles and machinery, accounts receivable, work in progress, etc. | 2 million AED | 1 million AED | Not required | |
| 3. Previous Experience within the last 10 years (Total value of projects executed by the consultant in AED) | Not less than (240) million, with no single project value less than (30) million | Not less than (30) million, with no single project value less than (5) million | Not required | |
| 4. Estimated value of projects eligible for participation (in AED) for the field of: | Unlimited | Up to (60) million | Up to (30) million | |
| Infrastructure Consultancy | ||||
| Specialized Infrastructure | ||||
| Specialized Works | ||||
| 5. Compliance of the number of technical staff and labor with the project area (Quota) for building construction consultancy projects | ||||
| Permitted floors for execution (Field of Engineering Consultancy for Building Construction) | Unlimited floors | G + 9 | G + 3 | |
| Permitted project area according to the classified activity category (square meter) | 60,000 | 20,000 | 12,000 | |
| Additional project area granted upon adding a registered engineer to the engineering staff for the activity (square meter) | 9,000 | 7,000 | 5,000 | |
| 6. Compliance criteria with quality and professional insurance requirements | ||||
| Quality Certificate | ISO 9001 | |||
| Professional Indemnity Insurance | 2 million AED per year, 200 thousand AED per incident without limit | 1 million AED per year, 100 thousand AED per incident without limit | Not required 500 thousand per year, 50 thousand AED per incident without limit | |
| 7. Required experience for technical staff for engineering consultancy activities | ||||
| Fields of Engineering Consultancy | Special | First | Second | |
| Building Projects | Floor limits | Unlimited floors | G + 9 | G + 3 |
| Minimum number of registered technical staff | 4 | 2 | 1 | |
| Years of experience for each engineer | 10 years | 7 years | 4 years | |
| Floor limits | Unlimited floors | G + 9 | G + 3 | |
| Infrastructure Projects, Specialized Infrastructure Projects, and Specialized Works | Minimum number of registered technical staff | 4 | 2 | 1 |
| Years of experience for each engineer | 10 years | 7 years | 4 years | |
| Floor limits | None | None | None | |
| Technical Works | Minimum number of registered technical staff | 1 | ||
| Years of experience for each engineer | 3 years | |||
| Support Works | Floor limits | None | None | None |
| Minimum number of registered technical staff | 1 | |||
| Years of experience for each engineer | 5 years | |||
| Auditing and Inspection Works | Floor limits | Unlimited floors | ||
| Minimum number of registered technical staff | 4 | |||
| Years of experience for each engineer | 10 years | |||
| Classification categories for the specialization | Special Category | |||
| Special restrictions if classified in specializations from this field | The engineering office may not practice any specialization from other engineering consultancy fields | |||
Article (8)
Technical Staff Data
The engineering office must attach to the new classification application, or when requesting renewal, upgrade, or amendment of the existing classification, the documents and data of the technical staff as follows:
1. A table showing the names of the engineers, the license holders for whom the required specializations are classified, and the registered engineers required according to the classification category for each activity, with the required data for documented years of experience, registration number and category, divided according to the field and specializations to be classified, all of which should be serialized and according to the approved form by the Department.
2. Proof of residence of the engineers, the license holders for the required specializations, within the country under the sponsorship of the engineering office and their full-time employment with it.
3. Submission of an electronic copy of all required documents.
4. Any documents or data requested by the concerned department.
Article (9)
Required Experience for Technical Staff for Engineering Consultancy Specializations
1. The engineering office must have for each classification category and for each specialization a number of engineers commensurate with the category and the specializations for which classification is requested, as follows:
| No. | Fields of Engineering Consultancy | Category | Floor Limits | Number of mandatory specializations (main specialization + addition of a related specialization) | Minimum number of registered engineers in the technical staff for the main specialization and its related specializations | Years of Experience |
|---|---|---|---|---|---|---|
| 1 | Building Projects | Special | Unlimited floors | 2 | 4 | 10 years |
| First | G + 9 | 2 | 2 | 7 years | ||
| Second | G + 3 | 1 | 1 | 4 years | ||
| 2 | Infrastructure Projects, Specialized Infrastructure Projects, and Specialized Works | Special | None | 2 | 4 | 10 years |
| 3 | First | 2 | 2 | 7 years | ||
| 4 | Second | 1 | 1 | 4 years | ||
| 5 | Technical Works | Second | None | 1 | 1 | 3 years |
| 6 | Support Works | Second | None | 1 | 1 | 5 years |
| 7 | Auditing and Inspection Works | Special | None | 2 | 4 | 10 years |
2. To secure the required number of specializations for each classification category, one or more specializations related to the main specialization must be added. The engineering office can suffice by providing the required number of specialized license-holding engineers, and the specialization is classified according to the years of experience available to the license holder.
3. The field of engineering consultancy for building projects is granted a floor area compatible with the classification category, and the engineering office can add additional project area for any specialization by registering and adding new registered engineers to that specialization. When adding an activity related to the main activity, the classification is done using one of the specialized engineers from the available technical staff. If the required specialization is not available, a specialized engineer is added to the team and is classified according to the available years of experience.
4. The engineering office has the right to add additional main specializations, and related additional specializations for one or more fields, provided that the appropriate technical staff is secured for it and for the category to be classified according to what is stated in clause (1) and clause (2) of this article.
5. The engineering office must apply for classification in all necessary specializations to complete the intended design and supervision works and secure the area quota for all specializations in proportion to the nature and size of the project and its available technical staff. The engineering office has the right to borrow from the area quota of a subcontracted engineering office in proportion to the technical staff and classified specializations as needed, and the borrowed area quota will be reserved from the area quota of the subcontracted engineering office for the same activity.
6. Borrowing of an area quota is not permitted except after subcontracting and documenting this contract on the electronic system for classification services and according to the procedures and conditions approved under the project area quota management system issued by the Department.
7. The engineering office is solely responsible for coordinating with its engineers and the engineers of the subcontracted engineering office to organize their registration requirements and their distribution among the specializations of the classified engineering consultancy fields, in order to secure the quota for the required project areas.
8. Upon completion of the procedures for appointing the engineering office to design a project, an area quota is reserved from the account of the main specialization and its related specializations according to the nature of the project and the necessary specializations to complete it, equivalent to (70%) of the project area or the works to be designed and supervised. This is until the license application is approved, at which point 63% of the reserved area quota is automatically released. Upon issuing the license to the contractor, an area quota equivalent to (23%) of the project area is reserved for supervision works and is released after the issuance of the project completion certificate for both the main engineering office and the subcontracted engineering office for the project. If the license is canceled, all reserved areas and quotas under it are released.
9. When classifying an engineering office in the specialization of Architectural Engineering Consultancy, the office shall provide the required number of specialized engineers and additional registered engineers as shown in clause (1.1) in Table No. (1) of Appendix No. (1).
Article (10)
Compliance with Quality and Professional Insurance Requirements for Engineering Consulting Offices
The engineering office must attach to the classification application, or when requesting renewal, upgrade, or amendment of the existing classification, all data, information, and documents related to the following, according to the requirements and standards for the classification of engineering offices, mentioned previously in Article (7):
a. Quality certificate
b. Professional insurance policy.
Article (11)
Criterion of Previous Experience and Estimated Value of Projects for Participation
1. The engineering office must have experience in designing and supervising projects during the (10) ten years preceding the date of submitting the classification application, which is appropriate in terms of type and size to the classification category and the required fields.
2. The estimated value of the projects in which the engineering office may participate shall be according to its classification category in the fields of infrastructure consultancy, specialized infrastructure, and specialized works, as detailed in the classification criteria for engineering offices mentioned in Article (7).
Article (12)
Data of Executed Projects
Data of projects executed by the engineering office are accepted as follows:
1. They must be accompanied by official contracts and completion certificates or final payment certificates showing the percentage of work completed for projects executed for governmental and semi-governmental entities within the country.
2. Experience from projects executed outside the country may be accepted, provided they are proven by execution certificates issued by governmental authorities in the country where they were executed and authenticated according to the procedures in force in the Emirate.
3. The engineering office shall be reclassified into the appropriate category upon the withdrawal of any of the partners on whose experience the office was classified.
4. For the classification of a branch within the Emirate, the experience of projects executed by the main center or one of its branches is accepted, provided that official authenticated certificates are submitted according to the procedures in force in the Emirate, confirming that the branches are wholly owned by the main center, along with an undertaking from the main center to bear all responsibilities and obligations.
5. A local engineering office may benefit from the experience of a foreign partner, provided that its share in the capital is not less than (30%) if it is one legal entity, not less than (20%) for each if they are two legal entities, and not less than (15%) for each if they are more than two legal entities.
6. A local engineering office in the Emirate that has established branches in other emirates of the country may benefit from the experience of these branches for the purpose of classifying the engineering office in the Emirate.
7. Without prejudice to the provisions of the preceding clauses of this article, the experience of projects executed in the country by a joint engineering office licensed in the Emirate is accepted when submitted with an application for renewal or upgrade of a local engineering office's classification or for a new classification application for a branch of a foreign engineering office, in which the main branch of the foreign engineering office was a partner, provided that the applicant provides the following:
a. A clearance certificate from the employer regarding the expiration of its responsibility for design defects.
b. Or a certificate proving the existence of professional insurance for the executed project, which is valid and meets the employer's conditions, stating the duration of its responsibility for design defects.
8. Experience of subcontracted projects not documented on the electronic system is not recognized unless accompanied by the following:
a. A letter of approval of the subcontracted engineering office from the project owner.
b. The subcontract and the main contract.
c. The building permit application and the building permit for the said project, showing the details of the engineering office and the details and scope of work of the subcontracted engineering office.
d. A completion certificate from authorities accepted by the Department.
e. A copy of the occupancy certificate for buildings completed more than one year after the enforcement of the classification system provisions.
9. The engineering office must submit a certificate of design completion payment and supervision payments or proof of design approval and the percentage of completion for projects it supervised for the private sector, certified by the owner or their representative, and a bank statement showing the deposit of this payment in its account, along with the engineering consultancy contract and an official completion certificate. The Department may request the engineering office to provide alternative documents to the above, depending on the requirements of each case.
10. If the engineering office wishes to use any projects that include more than one specialization for classification or upgrade, it must submit documents and records showing the value and nature of each specialization separately by providing a summary of the bill of quantities for the project, certified by the owner.
11. The experience of a natural person is not considered as experience of executed projects in the classification.
12. If several engineering offices execute one or more projects and any of them wishes to use its experience in this project for classification, it must provide proof of the joint venture between them, as well as the nature of the work performed by each member of the joint venture and the percentage of this work from the total project value. The value of the work completed by the engineering office applying for classification will be calculated only according to the actual completion rates.
13. No experience may be used to classify an engineering office more than once in the same specialization.
Article (13)
Specializations and Fields of Engineering Consultancy
1. Without prejudice to the authority of the technical committee to recommend the approval of updating or amending the engineering specializations and branches, the engineering specializations in which engineering consulting offices may be classified are determined according to the provisions of the instructions issued under this decision.
2. The following activities shall be designated for the practice of the engineering consulting profession:
1. Field of Engineering Consultancy for Building Projects.
2. Field of Engineering Consultancy for Infrastructure Projects.
3. Field of Engineering Consultancy for Specialized Infrastructure Projects.
4. Field of Engineering Consultancy for Specialized Works.
5. Field of Engineering Consultancy for Technical Works.
6. Field of Engineering Consultancy for Support Works.
7. Field of Engineering Consultancy for Auditing and Inspection Works.
8. Any fields and specializations recommended by the technical committee for future approval and issuance.
3. The availability of specializations within the technical staff of the engineering office shall be taken into account, according to the specialization and category in which it is classified and for the fields and specializations of engineering consultancy issued under the appendix attached to this decision.
Article (14)
Financial Criteria and Financial Position
1. For the purposes of financial classification, the engineering consulting office must possess acceptable assets for classification with a value that covers the total value of liabilities in addition to the paid-up capital for each category as a minimum for classification in each category, as follows:
| Statement | Financial Criteria and Financial Position | ||
|---|---|---|---|
| Special | First | Second | |
| Paid-up capital and net value of acceptable assets for classification (in AED) | 2,000,000 | 1,000,000 | Not required |
The engineering office must maintain accounting records and issue audited annual financial statements in accordance with international professional standards and relevant legislation.
2. Acceptable assets for classification are the assets presented in the office's actual balance sheet located within the country, supported by documentary evidence and legally owned exclusively by the engineering office applying for classification, which can be liquidated (converted to cash) upon request. The following assets can be considered acceptable for classification according to the conditions determined by the Department:
a. Cash and bank deposits.
b. Real estate.
c. Vehicles and machinery.
d. Accounts receivable that have been proven to be collected after the balance sheet date.
e. Work in progress if it has been invoiced and its value collected after the balance sheet date.
f. Accounts receivable with balances confirmed by governmental entities.
g. Trade receivables with balances confirmed by entities that do not fall under the definition of related parties, provided that no more than one year has passed since the due date for payment.
h. Accounts receivable with final enforcement judgments issued, provided that the enforcement judgment is not more than one year old from its date of issuance.
i. Insurances and the like.
j. Prepaid expenses and the like.
k. Any other assets approved by the Department.
3. The financial position of the engineering office shall be studied and evaluated by the accredited auditor or by any entity specified by the Department according to the form and requirements determined by the Department for this purpose.
4. The Department shall maintain a record of the engineering office's financial data in a special electronic program for storing and analyzing financial data.
5. A unified date shall be set for the audited annual financial report used in the classification of the engineering office that falls under the definition of "related parties" according to international professional standards.
6. The Department may introduce other complementary or alternative financial criteria.
7. The Department may disregard the provided assessment if the submitted balance sheet does not meet professional standards or whenever necessary, based on the recommendations of specialists.
Article (15)
Engineering Office Manager
If the owner of the engineering office is a national and not a registered engineer, he must appoint a responsible manager from among the members of the office's technical staff to whom the tasks of signing and acting on behalf of the office are delegated, provided that:
1. He is an engineer registered in the engineers' register.
2. He is dedicated full-time to the work of the engineering office.
3. He has the required period of experience according to the provisions of the system and classification instructions.
Article (16)
Engineering Consultancy Contract
The engineering office must conclude an engineering consultancy contract with the project owner or their representative, which shall include the following:
1. A precise identification of the parties to the contract.
2. A definition of the scope of work and the engineering consultancy specializations covered by the contract.
3. The contractual period agreed upon for the execution of the engineering works or services.
4. The estimated financial cost of the project.
5. The agreed-upon fees and how they will be paid.
6. The duties of the main engineering office and the duties of the engineering offices expected to be subcontracted, whether related to the preparation of studies, designs, plans, or supervision of execution.
7. Conditions for contract termination, penalty clauses, and fines (if any).
8. The applicable law in case of any dispute over the execution of the contract and the competent judicial authority to consider the dispute.
Article (17)
Any provision that contravenes or conflicts with the provisions of this decision is hereby repealed.
Article (18)
This decision shall be published in the Official Gazette and shall come into effect starting from March 3, 2019.
Issued
On: 29 / 12 / 1439 AH
Corresponding to 9 / 9 / 2018 AD
Falah Mohammed Al Ahbabi
Chairman of the Department of Urban Planning and Municipalities
Appendix to Administrative Decision No. (163) of 2018
Specializations and Fields of Engineering Consultancy in the Emirate
1- Field of Engineering Consultancy for Building Projects:
| Main Activity Code | Sub-activity Code | Specialization | Engineer's Specialization (Specialist) | Notes |
|---|---|---|---|---|
| 1.1 | Architectural Engineering Consultancy | Architect and Civil Engineer | Main specialization for all building project specializations | |
| 1.1.1 | Green Building Engineering Consultancy | Architect and Civil Engineer | Main specialization | |
| 1.1.2 | Engineering Consultancy in Environment and Sustainability | Architect with experience in the specialization | Main specialization and related to specialization No. (1.1) | |
| 1.2 | Civil Engineering Consultancy for Buildings | Civil Engineer | ||
| 1.2.1 | Foundation and Soil Mechanics Engineering Consultancy | Civil Engineer | ||
| 1.3 | Mechanical Engineering Consultancy for Buildings | Mechanical Engineer | ||
| 1.3.1 | Air Conditioning, Refrigeration, Heating, and Ventilation Engineering Consultancy for Buildings | Mechanical Engineer | ||
| 1.3.2 | Safety and Fire Protection Engineering Consultancy for Buildings | Mechanical Engineer | ||
| 1.3.3 | Water, Sanitation, and Irrigation Engineering Consultancy for Buildings | Civil Engineer | ||
| 1.4 | Electrical Networks Engineering Consultancy for Buildings | Electrical Engineer or Electronic Engineer | ||
| 1.4.1 | Telecommunication Networks Engineering Consultancy for Buildings | Electrical Engineer or Telecommunications Engineer |
2 - Field of Engineering Consultancy for Infrastructure Projects:
| Main Activity Code | Sub-activity Code | Specialization | Engineer's Specialization (Specialist) | Notes |
|---|---|---|---|---|
| 2.1 | Roads and Traffic Engineering Consultancy | Civil Engineer | Main specialization | |
| 2.1.1 | Engineering Consultancy in Internal Roads | Civil Engineer | ||
| 2.1.2 | Engineering Consultancy in Bridges | Civil Engineer | ||
| 2.1.3 | Engineering Consultancy in Tunnels | Civil Engineer | ||
| 2.1.4 | Engineering Consultancy in Dams, Hydraulic, and Geological Works | Civil Engineer or Geological Engineer | ||
| 2.1.5 | Sanitary Engineering and Wastewater Collection and Disposal Consultancy | Civil Engineer | ||
| 2.1.6 | Engineering Consultancy in Street Lighting | Electrical Engineer | ||
| 2.1.7 | Engineering Consultancy in Traffic Planning and Transportation | Civil Engineer or Traffic Engineer | ||
| 2.1.8 | Soil Survey and Classification Engineering Consultancy | Agricultural Engineer, Civil Engineer, or Geological Engineer | ||
| 2.2 | Engineering Consultancy in Water Transmission and Distribution | Mechanical Engineer or Civil Engineer | Main specialization | |
| 2.3 | Power Transmission and Distribution Consultancy | Electrical Engineer or specialized engineer | ||
| 2.3.1 | Electrical Networks and Distribution Engineering Consultancy | Electrical Engineer | ||
| 2.4 | Engineering Consultancy in Gas and Oil Transportation | Petroleum Engineer or Mechanical Engineer | Main specialization | |
| 2.4.1 | Chemical and Petroleum Engineering Consultancy | Petroleum Engineer or Chemical Engineer | ||
| 2.4.2 | Petroleum Refining Engineering Consultancy | Petroleum Engineer or Chemical Engineer | ||
| 2.4.3 | Oil and Gas Tank Pipelines Construction Engineering Consultancy | Mechanical Engineer | ||
| 2.4.4 | Petroleum Refining Units Engineering Consultancy | Petroleum Engineer or Chemical Engineer | ||
| 2.4.5 | Gas Extraction Engineering Consultancy | Chemical Engineer | ||
| 2.4.6 | Petrochemicals Engineering Consultancy | Petroleum Engineer or Chemical Engineer | ||
| 2.4.7 | Ores Installation Engineering Consultancy | Petroleum Engineer or Chemical Engineer | ||
| 2.5 | Engineering Consultancy in Railways | Civil Engineer, Mechanical Engineer, or Railway Engineer | Main specialization |
3- Field of Engineering Consultancy for Specialized Infrastructure Projects:
| Main Activity Code | Sub-activity Code | Specialization | Engineer's Specialization (Specialist) | Notes |
|---|---|---|---|---|
| 3.1 | Airport and Air Transport Engineering Consultancy | Civil Engineer | Main specialization, requires activity No. (1.1) | |
| 3.2 | Railway Construction and Development Engineering Consultancy | Civil Engineer, Mechanical Engineer, or Railway Engineer | Main specialization, requires activity No. (1.1) | |
| 3.3 | Seaports and Maritime Transport Engineering Consultancy | Civil Engineer or Marine Engineer | Main specialization, requires activity No. (1.1) | |
| 3.4 | Engineering Consultancy in Oil and Gas Facilities | Petroleum Engineer, Mechanical Engineer, or Civil Engineer | Main specialization, requires activity No. (1.1) | |
| 3.5 | Engineering Consultancy in Water Desalination Plants | Civil Engineer or Mechanical Engineer | Main specialization, requires activity No. (1.1) | |
| 3.6 | Engineering Consultancy in Power Plants | Electrical Engineer | Main specialization, requires activity No. (1.1) | |
| 3.7 | Electrical Installations Consultancy | Electrical Engineer or specialized engineer | Main specialization, requires activity No. (1.1) |
4- Field of Engineering Consultancy for Specialized Works:
| Main Activity Code | Sub-activity Code | Specialization | Engineer's Specialization (Specialist) | Notes |
|---|---|---|---|---|
| 4.1 | Restoration and Conservation of Antiquities Engineering Consultancy | Civil Engineer or Architect (with specialized certificates) | Main specialization | |
| 4.2 | Comprehensive Urban Planning Engineering Consultancy | Architect or Planning Engineer | Main specialization | |
| 4.3 | Engineering Consultancy in Environmental Planning | Environmental Engineer or engineer with experience in the specialization | Main specialization | |
| 4.3.1 | Engineering Consultancy in Environmental Pollution Control and Protection | Environmental Engineer or engineer with experience in the specialization | ||
| 4.4 | Engineering Consultancy in Alternative Energy and its Conservation | Specialized Engineer | Main specialization | |
| 4.5 | Surveying Engineering Consultancy | Civil Engineer or Surveying Engineer | Main specialization | |
| 4.5.1 | Survey Planning, Aerial Photography, and Information Management Systems Engineering Consultancy | Civil Engineer or Surveying Engineer | ||
| 4.5.2 | Geodetic Surveying Engineering Consultancy | Surveying Engineer, Geological Engineer, or Geodetic Engineer | ||
| 4.5.3 | Engineering Consultancy in Land Surveying | Civil Engineer or Surveying Engineer | ||
| 4.5.4 | Marine Surveying Engineering Consultancy | Marine Engineer | ||
| 4.6 | Engineering Consultancy in Alternative Energy and its Conservation | Specialized Engineer | Main specialization |
5- Field of Engineering Consultancy for Technical Works:
| Main Activity Code | Sub-activity Code | Specialization | Engineer's Specialization (Specialist) | Notes |
|---|---|---|---|---|
| 5.1 | Electronic Engineering Consultancy | Electronic Engineer | Main specialization | |
| 5.1.1 | Electronic Devices Engineering Consultancy | Electronic Engineer | ||
| 5.1.2 | Engineering Consultancy in Medical Equipment | Electronic Engineer or Medical Equipment Engineer | ||
| 5.1.3 | Engineering Consultancy in Medical Services and Laboratories | Electronic Engineer or Medical Equipment Engineer | ||
| 5.1.4 | Aviation Devices Engineering Consultancy | Electronic Engineer or Aeronautical Engineer | ||
| 5.2 | Engineering Consultancy in Computers | Computer Engineer or IT Engineer | Main specialization | |
| 5.3 | Meteorology Engineering Consultancy | Aeronautical Engineer or Meteorology Specialist | Main specialization | |
| 5.4 | Aviation Engineering Consultancy | Aeronautical Engineer or Mechanical Engineer | Main specialization | |
| 5.5 | Power and Automatic Control Engineering Consultancy | Mechanical Engineer or Electrical Engineer | Main specialization | |
| 5.5.1 | Mechanical Power Engineering Consultancy | Mechanical Engineer | ||
| 5.5.2 | Fluid Mechanics Engineering Consultancy | Mechanical Engineer | ||
| 5.5.3 | Machine Mechanics Engineering Consultancy | Mechanical Engineer | ||
| 5.6 | Heavy Machinery Engineering Consultancy | Mechanical Engineer | Main specialization | |
| 5.7 | Automotive Engineering Consultancy | Mechanical Engineer | Main specialization | |
| 5.8 | Shipbuilding Engineering Consultancy | Marine Engineer or Mechanical Engineer | Main specialization | |
| 5.9 | Engineering Consultancy in Land Reclamation and Soil Improvement | Agricultural Engineer, Civil Engineer, or Geological Engineer | Main specialization | |
| 5.9.1 | Engineering Consultancy in Agriculture and Agricultural Mechanization | Agricultural Engineer or Mechanical Engineer | ||
| 5.9.2 | Engineering Consultancy in Irrigation Sources | Agricultural Engineer, Civil Engineer, or Geological Engineer | ||
| 5.9.3 | Engineering Consultancy in Soil Survey and Classification | Agricultural Engineer, Civil Engineer, or Geological Engineer | ||
| 5.9.4 | Engineering Consultancy in Livestock | Agricultural Engineer, Civil Engineer, or Geological Engineer | ||
| 5.10 | Mining, Mineral, and Geological Engineering Consultancy | Geological Engineer or Mining Engineer | Main specialization | |
| 5.10.1 | Metallurgy Engineering Consultancy | Geological Engineer or Mining Engineer | ||
| 5.10.2 | Mining and Mineral Equipment Engineering Consultancy | Industrial Engineer or Mechanical Engineer | ||
| 5.10.3 | Geophysics, Geochemistry, and Geomechanics Engineering Consultancy | Geological Engineer or Mining Engineer | ||
| 5.10.4 | Drilling, Reservoir, and Production Engineering Consultancy | Chemical Engineer, Geological Engineer, Physicist, or Mechanical Engineer | ||
| 5.11 | Physical Engineering Consultancy | Physics Engineer | Main specialization |
6- Field of Engineering Consultancy for Support Works:
| Main Activity Code | Sub-activity Code | Specialization | Engineer's Specialization (Specialist) | Notes |
|---|---|---|---|---|
| 6.1 | Construction Project Management Consultancy | Master's in Project Management after a Bachelor's in Engineering or an engineer specialized in construction project management | Main specialization | |
| 6.1.1 | Industrial Engineering Project Management Consultancy | Master's in Project Management after a Bachelor's in Engineering or an engineer with experience in industrial engineering project management | ||
| 6.1.2 | Agricultural Engineering Project Management Consultancy | Master's in Project Management after a Bachelor's in Engineering or an engineer with experience in agricultural engineering project management | ||
| 6.1.3 | Arbitration Consultancy for Construction Projects | Master's in Project Management after a Bachelor's in Engineering or an engineer with experience in construction project management | ||
| 6.1.4 | Engineering Consultancy in Claims Analysis | Master's in Project Management after a Bachelor's in Engineering or an engineer with experience in construction project management | ||
| 6.1.5 | Quantity Surveying Consultancy for Engineering Projects | Civil Engineer or Quantity Surveyor | ||
| 6.1.6 | Engineering Management Consultancy in Technical Feasibility Studies | Master's in Project Management after a Bachelor's in Engineering or an engineer with experience in construction project management | ||
| 6.1.7 | Arbitration Consultancy for Engineering Projects | Master's in Project Management after a Bachelor's in Engineering or an engineer with experience in engineering project management | ||
| 6.2 | Landscape Architecture Consultancy | Architect | Main specialization | |
| 6.3 | Interior Design Engineering Consultancy | Architect or Interior Designer | Main specialization | |
| 6.4 | Manufacturing and Materials Engineering Consultancy | Industrial Engineer or Chemical Engineer | Main specialization | |
| 6.4.1 | Industrial Production Engineering Consultancy | Industrial Engineer or Mechanical Engineer | ||
| 6.4.2 | Engineering Consultancy in Chemical Industries | Industrial Engineer or Chemical Engineer | ||
| 6.4.3 | Engineering Consultancy in Mining Industries | Industrial Engineer or Mining Engineer | ||
| 6.4.4 | Engineering Consultancy in Food Industries | Industrial Engineer | ||
| 6.4.5 | Plastics Engineering Consultancy | Chemical Engineer |
7- Field of Engineering Consultancy for Auditing and Inspection Works:
| Main Activity Code | Sub-activity Code | Specialization | Engineer's Specialization (Specialist) | Notes |
|---|---|---|---|---|
| 7.1 | Auditing of Structural Drawings | Structural Engineer | Main specialization | |
| 7.2 | Auditing of Non-Structural Drawings | Specialized Engineer | Main specialization for auditing of non-structural drawings | |
| 7.2.1 | Auditing of Electrical Drawings | Electrical Engineer | ||
| 7.2.2 | Auditing of Mechanical Drawings | Mechanical Engineer | ||
| 7.2.3 | Auditing of Safety, Fire Prevention, and Firefighting Systems Drawings | Mechanical Engineer | ||
| 7.3 | Inspection of Structural Works and Elements of Buildings | Structural Engineer | Main specialization for all inspection works | |
| 7.4 | Inspection of Non-Structural Works and Elements of Buildings | Specialized Engineer | Main specialization for all inspection works of non-structural elements | |
| 7.4.1 | Inspection of Electrical Works and Systems in Buildings | Electrical Engineer | ||
| 7.4.2 | Inspection of Mechanical Works and Systems in Buildings | Mechanical Engineer | ||
| 7.4.3 | Inspection of Safety, Fire Prevention, and Firefighting Systems in Buildings | Mechanical Engineer |
Document Criteria
Document Number
163
Year
2018
Level المستوى
Local محلي
Category الفئة
Legislations تشريعات
Status الحالة
Active ساري
Type النوع
Decision قرار
Sector الموضوع
Municipality البلدية